GRP Angles Length:6m The fibreglass layup is a

The fibreglass layup is a combination of multi layered cross-ply glass fibre fabrics

All of our GRP tubes are manufactured using a high volume fraction of fibreglass in a polyester

Pullbraided fibreglass tubes are made with a combination of unidirectional fibreglass and an internal 45° double helix fibreglass braiding which allows a thinner walled tube to be made with a smooth surface finish that will give excellent hoop strength resistant to bending and torsional forces

We manufacture a wide range of unidirectional tubes from 3mm up to 12

GRP Angles Length:6m The fibreglass layup is aGRP angles are pultruded in a polyester matrix. The fibreglass layup is a combination of multi layered cross ply glass fibre fabrics, giving enhanced strength across the axis for all round excellent mechanical properties. GRP angles are pultruded to BS EN 13706 standard. Profile thickness less than 6mmare manufactured to E17 specifications (full section modulus, GPa17). Structural profile thickness 6mm and greater are manufactured to E23