BSA-ROAD-UT for Campagnolo Ultra Torque cranks Seal Type:Cross This bottom bracket will fit

This bottom bracket will fit a 386EVO or Rotor 30mm crank on a Cervelo frame

cc to confirm your derailleur compatibility if you are not running EPS12 electronic derailleurs

By replacing your stock 12-tooth pulleys and cage with a 14-tooth top pulley and a 19-tooth bottom pulley mounted on the stiffest cage available

and Rival XPLR eTap AXS rear derailleurs

BSA-ROAD-UT for Campagnolo Ultra Torque cranks Seal Type:Cross This bottom bracket will fitFits a Campagnolo Ultra Torque crank set on a classic BSA threaded road frame. Choose road seals for road use. Choose cross seals for gravel, CX, and commuter bikes or if you frequently ride on wet roads. For installation, use a 16 notch tool with an internal diameter of 42. 7mm (measured at the inside of the notches). This is your most traditional tool for BSA bottom brackets, previously used by Sram GXP, Chris King, Campagnolo and older style