Round Tube Roll Set for Manual 3-Roll (Large Radius) Bender (30.0 mm OD) 2-1/4" OD 13 cubic inches of oil/minute

13 cubic inches of oil/minute output at full pressure (vs

Outside Diameter of the Tubing (OD): 5/8" OD (15

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

2" (w) x 1/2" (leg) Channel Stock - Easyway

Round Tube Roll Set for Manual 3-Roll (Large Radius) Bender (30.0 mm OD) 2-1/4" OD 13 cubic inches of oil/minuteSpecs Outside Diameter of the Tubing (OD): 30. 0 mm Maximum Wall Thickness: 0. 120" (3. 0 mm) Minimum Inside Radius: Approximately 12 (304. 8 mm), depending on the type, grade, wall thickness, and quality of the material Includes 1 x Keyed Center Roll 2 x Secondary Rolls Resources Tube and Pipe Bending Basics What Am I Bending: The Differences Betweeen Tube, Pipe, and More Lead Time Lead times vary by product. Many orders can ship out within a few