5/8-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor Thread 1/4"x20TPI for Drill Press, Wood lathe or Mill. Interchangable Tool Rest Brand BMWOOD Material Alloy Steel

Brand BMWOOD Material Alloy Steel Included Components 10" Flat Jaws The jaws are compatible with the chucks: SuperNOVA2

You can get the rest close to the action for maximum tool support whether below or above center height

The MT1 taper allows for compatibility with some small wood lathes

insert the nib into the white pad and slide the tails stock in until the black pad is pressed against the other end and lock off

5/8-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8"X16TPI and one JT33-MT1 Taper Arbor Thread 1/4"x20TPI for Drill Press, Wood lathe or Mill. Interchangable Tool Rest Brand BMWOOD Material Alloy SteelHeavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5 8 inch in diameter. Designed Inner Thread 3 8"X16TPI and 1 4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using together with the draw bar kit. Easily open and close the three chuck jaws using the included key. 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision