Rule 800GPH Electronic Sensing Bilge Pump - 12V [20SA] Lighting | Flood/Spreader Lights The amount of torque required

The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder

or 24 hour circuit protection

A Class B AIS transponder requires a dedicated GPS antenna (all Class B units must have their own internal GPS and can't use an external feed for regulatory purposes) as well as a VHF antenna or suitable VHF-AIS antenna splitter

the PSS bellows must be inspected on a regular basis for any sign of wear

Rule 800GPH Electronic Sensing Bilge Pump - 12V [20SA] Lighting | Flood/Spreader Lights The amount of torque required800GPH Electronic Sensing Bilge Pump 12V In the next generation sensing bilge pumps, the 800GPH 12V S series pump works on the principle of impeller resistance. The pump will turn on every 2 1 2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2 1 2 minutes. Water is kept in check between 1 8" and 3